Übersetzung und Analyse von Wörtern durch künstliche Intelligenz ChatGPT
Auf dieser Seite erhalten Sie eine detaillierte Analyse eines Wortes oder einer Phrase mithilfe der besten heute verfügbaren Technologie der künstlichen Intelligenz:
- wie das Wort verwendet wird
- Häufigkeit der Nutzung
- es wird häufiger in mündlicher oder schriftlicher Rede verwendet
- Wortübersetzungsoptionen
- Anwendungsbeispiele (mehrere Phrasen mit Übersetzung)
- Etymologie
stationery pad - Übersetzung nach russisch
![embossed]] design](https://commons.wikimedia.org/wiki/Special:FilePath/Embossing-stationery.jpg?width=200 "embossed]] design")
![Example of [[thermographic printing]]. The uneven quality of the text is a result of the process and easily differentiates thermographic printing from embossing](https://commons.wikimedia.org/wiki/Special:FilePath/Thermo-stationery.jpg?width=200 "Example of [[thermographic printing]]. The uneven quality of the text is a result of the process and easily differentiates thermographic printing from embossing")
![Inside a stationery shop in [[Hanoi]]](https://commons.wikimedia.org/wiki/Special:FilePath/Vănphòngphẩm-InsideStationeryShop03012009606.jpg?width=200 "Inside a stationery shop in [[Hanoi]]")
['steiʃ(ə)nə]
существительное
общая лексика
торговец канцелярскими принадлежностями
книготорговец
устаревшее выражение
книгоиздатель
Wikipedia
The Π pad (pi pad) is a specific type of attenuator circuit in electronics whereby the topology of the circuit is formed in the shape of the Greek capital letter pi (Π).
Attenuators are used in electronics to reduce the level of a signal. They are also referred to as pads due to their effect of padding down a signal by analogy with acoustics. Attenuators have a flat frequency response attenuating all frequencies equally in the band they are intended to operate. The attenuator has the opposite task of an amplifier. The topology of an attenuator circuit will usually follow one of the simple filter sections. However, there is no need for more complex circuitry, as there is with filters, due to the simplicity of the frequency response required.
Circuits are required to be balanced or unbalanced depending on the geometry of the transmission lines they are to be used with. For radio frequency applications, the format is often unbalanced, such as coaxial. For audio and telecommunications, balanced circuits are usually required, such as with the twisted pair format. The Π pad is intrinsically an unbalanced circuit. However, it can be converted to a balanced circuit by placing half the series resistance in the return path. Such a circuit is called a box section because the circuit is formed in the shape of a box.
